top of page
Search

Lever/Mortice Locks: Do You Have the Correct Final Exit Door Lock for Your Insurance Policy?

Writer: duncanallanlocksmiths
duncanallanlocksmiths
Oct 16
5 min read

A small stamp on the faceplate of a lock can make a big difference when you need to make an insurance claim. Many UK home insurance policies ask for a suitable lock on the final exit door, and for timber doors that often means a 5 lever mortice lock that meets the correct British Standard.


Most homes likely have the right lock fitted - especially if the door has been upgraded in recent years. But it is still worth checking. If a policy says you must have a certain standard of lock and the fitted lock does not meet it, an insurer may question a claim after a break-in.


This guide explains what 3 lever and 5 lever locks are, what BSI approval means, and how to check whether your final exit door lock is likely to meet your insurance requirements.


Close-up view of a British Standard mortice lock on the edge of a timber front door.
The British Standards Institution (BSI) Kitemark

What a lever lock does on a door


A lever lock is a mechanical lock commonly fitted into a timber door. It works by using a key to lift a set of internal levers to the correct height. When all the levers line up, the bolt can move in or out of the door frame.


Lever locks are most often seen as mortice locks, which means the lock case sits inside a pocket cut into the door itself.


There are two common types:


  • Mortice deadlock

    This has a key-operated bolt only. It is often used with a separate latch or night latch.


  • Mortice sashlock

    This has a key-operated bolt and a latch operated by handles. Many front and back timber doors use this type.


The more secure lever locks are designed to resist common attack methods better than basic versions. The level of security depends on the design, number of levers, bolt throw, anti-pick features, and whether the lock has been tested to a recognised standard.


What a 3 lever lock is


A 3 lever lock has three internal levers that must be lifted by the key before the bolt can move. These locks are common on internal doors, older external doors, sheds, outbuildings, and lower security applications.


A 3 lever lock can still lock a door - It is not useless. But it is generally not considered suitable as the main lock on a final exit door for insurance purposes.


The main points to know are:


  • It offers a lower level of key variation than a 5 lever lock.

  • It is more likely to be used on internal doors than main external doors.

  • It may not meet the requirements written into many home insurance policies.

  • It should not be assumed to be British Standard approved.


If your front door or main back door has a 3 lever mortice lock as its primary lock, it is sensible to have it checked. It may still operate smoothly, but that does not mean it meets the standard your insurer expects.


Overhead view of a 3 lever mortice lock and key on a wooden surface.
A 3 lever lock can look similar to a 5 lever lock from the keyhole alone.

What a 5 lever lock is


A 5 lever lock has five internal levers. In simple terms, the key has to lift more parts into the correct position before the bolt can move. This gives the lock more possible key differs and, when properly designed, a better level of security.


But there is a key detail many people miss:


Not every 5 lever lock is British Standard approved.

For many insurance policies, the wording is not just ā€œ5 lever lockā€. It may say something like 5 lever mortice deadlock conforming to BS3621, or similar wording. That standard matters.


A 5 lever lock that conforms to the relevant British Standard will usually show clear markings on the lock faceplate. You may see:


  • The BSI Kitemark

  • A British Standard number, often BS3621 for many timber final exit door locks

  • The manufacturer name

  • Sometimes extra details such as security ratings or lock type


BS3621 is widely associated with key-operated locks that can be locked and unlocked from both sides. There are also other standards used in certain situations, such as locks designed for keyless escape from the inside. Flats, rented homes, fire safety requirements, and multi-occupancy buildings can need particular care, so ask us if you are unsure.


Why the final exit door matters for insurance


The final exit door is the door normally used to leave the property and to secure it when no one is inside. In many homes this is the front door, but it could be a back door, side door, or another main entrance depending on how the property is used.


Insurers care about this door because it is one of the main access points into the home. If the policy includes a minimum security condition, it may require the final exit door to have a particular type of locking system.


For a timber door, that often means a BSI approved 5 lever mortice lock to the correct British Standard. For uPVC, composite, or aluminium doors, the requirement may refer to a multi-point locking system instead.


Eye-level view of a locked timber front door from inside a UK home.
Inside a multipoint locking system - this can be very different to a lever (mortice) lock.

The concern is not only security. It is also compliance with the policy wording. If a home is burgled and the required lock was not fitted or was not used, the insurer may ask questions during the claim process.


That does not mean every claim will automatically fail. Policies differ, and insurers assess claims based on the facts. But fitting the correct lock removes a common problem before it becomes stressful.


How to check whether your lock is likely to be correct


You do not need to dismantle the door to do a basic check. Start with the edge of the door, where the lock faceplate is visible when the door is open.


Look for these signs:


  • A BSI Kitemark on the faceplate

  • The standard number, such as BS3621

  • The words ā€œ5 leverā€

  • A bolt that throws securely into the frame

  • No loose handles, worn keys, or movement in the lock case


Then check your insurance documents. Look for any section about door locks, minimum security, or theft cover conditions. The policy may use specific wording, so match the lock to the wording rather than guessing.


Be careful with older locks. A lock can look solid and in good working order, and still fall short of current policy requirements. Paint or scratches on the faceplate can also hide the markings, which makes identification harder.


If you have a uPVC or composite door, do not assume the same lever lock rules apply. These doors often use multi-point strips, cylinders, hooks, rollers, or deadbolts. Your policy may describe them differently.


Close-up view of a lock faceplate showing British Standard style markings.
A quick look at the door edge can often confirm whether a lock is approved.

Get the lock checked if you are not sure


A correct final exit door lock helps protect both the property and the insurance position. In many cases, the existing lock will already be suitable. The important step is to check rather than assume.


If the faceplate has no clear markings, the lock is only 3 lever, the door is old, or the insurance wording is hard to match, ask us at Duncan Allan Locksmiths and we can identify it. We can confirm whether the lock meets the required standard and advise on a suitable replacement if needed.


This article is general guidance only. Always check your own insurance policy wording, and speak to your insurer - or speak to us - if anything is unclear. A short check now is far easier than finding out after a break-in that the wrong lock was fitted.


If you have any concerns about the issues mentioned above,Ā a simple no obligation free assessment from a reputable, local, affordable, vetted, professional locksmith can put your mind at ease.


Duncan Allan LocksmithsĀ checks all of those marks.


Phone: 07591792992


If you have any further questions at all about your doors or locks, please use the phone number or email above or visit the website to message usĀ for a free no obligation quote.


Ā 
Ā 
Ā 

Comments


bottom of page